In this video we demonstrate how to make a wall lining for a curved wall using Standard Plasterboard type A 9.5 mm.

Tools and products you need:

• Standard Plasterboard type A 9.5 mm
• Drywall Screw TN 3.5 x 25
• Tape Measure
• Pencil
• Level
• Utility Knife
• Drywall Screwdriver

Here are the steps we followed:

We start by measuring the plasterboard and marking 30 cm intervals along the entire length of the board. We carefully press the board in the shape of the curved wall and using a Drywall Screw TN 3.5 x 25 mm, we fix the board to the vertical CW profiles, which are also positioned at an axial distance of 30 cm. We also fix the board to the horizontal UW profiles at the base.

We repeat this action until the entire height of the wall is lined with plasterboard.