In this video we demonstrate how to quickly, easily, and correctly cut Titan Board.

Tools you need:

• Utility knife
• Tape measure

Here are the steps we followed:

Grasp the cutter of the utility knife and the beginning of the tape measure with one hand and pull the tape measure to the desired length with the other. Use the case of the tape measure to fix the length of the cut.

Using light pressure, we cut the board with the knife.

Press the board down lightly but quickly using both hands, then cut the other side of the board using light pressure and then swiftly raise the board in the opposite direction so that the piece is completely detached from the rest of the board.

You can follow the same steps to cut the width and the length of the board as well as to cut different sizes of strips and other shapes.